Hyundai Equus: BlueLink Control Switch Components and Components Location

Telemetics Unit (TMU) Repair procedures

Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the front AVN monitor. (Refer to "Premium AVN System") 3. Remove the MTS unit after loosening the screw and nuts. 4. ...

BlueLink Control Switch Repair procedures

Removal 1. Remove the Electro chromic Inside rear view mirror. (Refer to Electro Chromic Inside Rear View Mirror) Installation 1. Install the Electro chromic Inside rear view mirror. (Refer ...

See also:

Pre-active Seat Belt (PSB) Description and Operation
Description Pre-active Seat Belt (PSB) guarantees initial restraint performance by winding the seat belt right before a crash or dangerous condition and enhances the effects of the seat belt pr ...

Engine Control Module (ECM) Repair procedures
Removal     When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. [In the case of installing used ECM] 1) Perform "ECM Neutra ...

Rear vanity mirror (if equipped)
To use the rear vanity mirror, press the cover and it will slowly open and the mirror lamp will turn on. CAUTION Close the mirror cover securely. If the mirror cover is not closed, the lamp ...