>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front AVN monitor.
(Refer to "Premium AVN System") |
3. |
Remove the MTS unit after loosening the screw and nuts. |
4. |
Disconnect the cables and connectors from the MTS unit. |
Installation |
1. |
Install the MTS unit after connecting the cables and connectors. |
2. |
Install the front AVN monitor. |
3. |
Connect the negative (-) battery terminal. |
Smart Key Repair procedures
Smart Key
Battery Inspection
1.
Check that the red light flickers when the door lock or unlock button is pressed on the transmitter.
2.
Remove the battery (A) and check voltage if the red lig ...
Cooling system
Check cooling system components, such as radiator, coolant reservoir, hoses and
connections for leakage and damage. Replace any damaged parts. ...
Description and Operation
Description
Emissions Control System consists of three major systems.
•
Crankcase Emission Control System prevents blow-by gas from
releasing into the atmosphere. This system recycles gas ba ...