>
Mode Control Actuator Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the mode control actuator connector.
3.
Verify that the mode control actuator operates to the defrost mode when connecting 12V to ...
Rear Bumper Cover Components and Components Location
Component Location
1. Rear bumper cover
...
Air Quality Sensor (AQS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Connect the GDS.
3.
Check the output voltage of AQS between terminal 2 and 3.
1. DC 12V( Ignition)2. Sensor ground3. AQS signal
Specif ...