>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console.
(Refer to Body - "Floor Console Assembly") |
3. |
Remove the spliter unit (A) after disconnecting the connectors and loosening the mounting bolts. |
Installation |
1. |
Install the spliter unit after connecting connector.
|
2. |
Install the floor console. |
3. |
Connect the negative (-) battery terminal and then check to operate the rear monitor. |
General Information
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Using the battery checker (MCR-570 KIT), check the battery for damag ...
Water pump Troubleshooting
Troubleshooting
Water Pump
SymptomsPossible CausesRemedyCoolant leakage
•
From the bleed hole of the water pump
Visually check
•
Check leaks after about ten-minute warming up.
•
If ...
Trip Computer Mode
This mode displays driving information like the tripmeter, fuel economy, and
so on.
❈ For more details, refer to “Trip Computer” in this chapter. ...