>
Removal |
1. |
Remove the floor console upper tray.
(Refer to Body - "Floor Console Assembly") |
2. |
Remove the center fascia lower tray.
(Refer to Body - "Center fascia pannel") |
3. |
Remove the multimedia jcak (A) after releasing the fixed hooks (B). |
Installation |
1. |
Connect the multimedia jack connector. |
2. |
Install the multimedia jack. |
3. |
Install the center facia lower tray.
|
Transmission Control Module (TCM) Schematic Diagrams
1. TCM Connector and Terminal Function
2. TCM Terminal Function
Connector
PinDescriptionPinDescription1Battery power48-2Battery power49-3Power(IG 1)5027 Brake control solenoid valve4Ground51-5G ...
Special Service Tools
Special Service Tools
Tool(Number and Name)IllustrationUse09581-11000Piston expanderSpreading the front disc brake piston.09568-2J100Ball joint removerRemoval of the rear assist arm and tie rod e ...
Over Pressure Valve (OPV) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -"Release Residual Pressu ...