>
Initialization and Troubleshooting Procedures |
1. |
Initialization Procedure
: Disconnect (connector or battery) for 30 seconds (time required for internal condenser discharge), then reconnect the power. |
2. |
Troubleshooting Procedure
|
Automatic transmission fluid
Automatic transmission fluid should not be checked under normal usage conditions.
But in severe conditions, the fluid should be changed at an authorized EQUUS
dealer in accordance to the scheduled ...
Troubleshooting
Troubleshooting
SymptomSuspect areaRemedyEngine misfire with abnormal internal lower engine noises.Worn crankshaft bearings.Loose or damaged engine drive plate.Replace the crankshaft and bearings ...
Knock Sensor (KS) Description and Operation
Description
Knocking is a phenomenon characterized by undesirable
vibration and noise and can cause engine damage. Knock Sensor (KS) is
installed on the cylinder block and senses engine knockin ...