>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly") |
3. |
Disconnect the connector from the console upper cover. |
4. |
Remove the front keyboard unit (A) after loosening the mounting screws. |
Installation |
1. |
Install the front keyboard unit to the console upper cover. |
2. |
Install the floor upper cover to the floor console. |
Photo Sensor Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will ri ...
Low tire pressure position telltale
When the tire pressure monitoring system warning indicators are illuminated and
warning massage displayed on the cluster LCD display, one or more of your tires
is significantly under-inflated.
...
Speakers Repair procedures
Inspection
1.
Troubleshooting for Speaker
(1)
Basic inspection of speaker
Inspect the sound from speaker after verifying that the
speaker mounting screws are removed and the wiring connector ...