>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Open the trunk, remove the right trunk trim.
(Refer to Body - "Trunk Trim") |
3. |
Remove the external amplifier after disconneting the connector (A) and loosening the mounting nuts (B). |
Installation |
1. |
Install the external amplifier after connecting the connector. |
2. |
Install the right trunk trim. |
3. |
Connect the negative (-) battery terminal.
|
35R Clutch Control Solenoid Valve(35R/C_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Seat Belt Buckle Switch (BS) Components and Components Location
Components
...
Operating Door Locks From Outside the Vehicle
To lock the doors, press the button on the outside door handle while carrying
the Smart Key with you or press the Door Lock button on the Smart Key.
Put your hand in the driver’s outside door han ...