>
Removal |
Take care not to scratch the crash pad and related parts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the center fascia upper panel.
(Refer to Body - "Center Fascia Panel") |
3. |
Remove the front LCD monitor after loosening the mounting screws. |
Installation |
1. |
Install the front LCD monitor after connecting the connector. |
2. |
Install the center fascia panel.
|
Reprogramming a single HomeLink® button
To program a new device to a previously trained HomeLink® button, follow these
steps:
1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has
been completed.
2. When the ...
Checking the engine oil level
1. Be sure the vehicle is on level ground.
2. Start the engine and allow it to reach normal operating temperature.
3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...
Front Pillar Trim Components and Components Location
Component Location
1. Front pillar trim
...