>

Hyundai Equus: Repair procedures - Horn - Body Electrical System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Repair procedures

Removal
1.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
2.
Remove the bolts and disconnect the horn connectors, then remove the high pitch horn (A) and low pitch horn (B).

Installation
1.
Install the horns after connecting the horn connectors.
2.
Install the front bumper cover.
Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal.

The horn should make a sound. If the horn fails to make a sound, replace it.
Horn Relay Inspection
1.
Remove the horn relay (A) from the engine room relay box.
2.
There should be continuity between the No.87and No.30 terminals when power and ground are connected to the No.85 and No.86 terminals.
3.
There should be no continuity between the No.87 and No.30 terminals when power is disconnected.

    Components and Components Location
    Component Location 1. Horn switch2. Engine room relay box3. Horn (Low pitch)4. Horn (High pitch)5. Horn relay6. Clock spring ...

    Premium AVN System
    ...

    See also:

    Glove box
    The glove box can be locked and unlocked with the mechanical key of the smartkey (1). To open the glove box, pull the lever (2) and the glove box will automatically open. Close the glove box ...

    Transmission Control Module (TCM) Description and Operation
    Description Transmission Control Module (TCM) is the automatic Transmission's brain. The module receives and processes signals from various sensors and implements a wide range of Transmission ...

    Power Steering Motor Repair procedures
    Replacement 1. Remove the air cleaner (A). 2. Loosen the nut and then remove the air filter (A). 3. Remove the front bumper. (Refer to Body - "Front Bumper") 4. Remove the left head l ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com