>

Hyundai Equus: Rear Seat Belt Retractor Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Rear Seat Belt / Rear Seat Belt Retractor Repair procedures

Replacement

•	When installing the belt, make sure not to damage the retractor.

1.	Remove the rear package tray trim. (Refer to Interior Trim - "Rear Package Tray Trim")

2.

After loosening the mounting bolt, then remove the rear seat belt retractor (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

3.

After loosening the retractor (A) mounting bolt, remove the rear seat belt (B).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.8 ~ 39.8 lb-ft)

4.

Install in the reverse order of removal.

•	Make sure the connector is plugged in properly.

•	Replace any damaged clips.

Rear Seat Belt Retractor Components and Components Location

Component Location 1. Rear seat belt retractor ...

Rear Center Seat Belt Retractor Components and Components Location

Component Location 1. Rear center seat belt retractor ...

See also:

Repair procedures
Service Adjustment Procedure Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead. 2. Measure the distance that the steering wheel can be ...

Forward-Facing child restraints
A forward-facing child restraint provides restraint for the child's body with a harness. Keep children in a forwardfacing child restraint with a harness until they reach the top height or ...

Snow tires
If you equip your car with snow tires, they should be the same size and have the same load capacity as the original tires. Snow tires should be installed on all four wheels; otherwise, poor handli ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com