>

Hyundai Equus: Front Seat Belt Buckle Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Front Seat Belt / Front Seat Belt Buckle Repair procedures

Replacement

1.	Remove the front seat assembly. (Refer to Front Seat - "Front Seat Assembly")

2.	Disconnect the connectors (A).

3.	After loosening the mounting screws, then remove the memory power seat unit (B).

4.	Remove the front seat belt buckle connector wiring harness (A).

5.

After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :

39.2 ~ 53.9 N.m (4.0 ~ 5.5kgf.m, 28.9 ~ 39.8 lb-ft)

6.

Install in the reverse order of removal.

•	Make sure the connector is plugged in properly.

•	Replace any damaged clips.

Front Seat Belt Buckle Components and Components Location

Component Location 1. Front seat belt buckle ...

Rear Seat Belt

...

See also:

Necessary inspections
Fluid levels, such as engine oil, engine coolant, brake fluid, and washer fluid should be checked on a regular basis, with the exact interval depending on the fluid. Further details are provided i ...

Rear combination light bulb replacement
(1) Stop, tail light and side marker (2) Rear turn signal light (3) Back-up light Rear back-up light If the light is not operating, have the vehicle checked by an authorized EQUUS dealer. Tur ...

Pre-active Seat Belt (PSB) Description and Operation
Description Pre-active Seat Belt (PSB) guarantees initial restraint performance by winding the seat belt right before a crash or dangerous condition and enhances the effects of the seat belt pr ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com