>
Replacement |
|
1. |
Remove the safety belt (A) by turning it in the direction of arrow using a flat-head screwdriver. |
2. |
Remove the center pillar lower trim.
(Refer to Interior Trim - "Center Pillar Trim") |
3. |
Remove the center pillar upper trim.
(Refer to Interior Trim - "Center Pillar Trim") |
4. |
After loosening the mounting bolt, then remove the front seat belt lower anchor (A).
|
5. |
Loosen the front seat belt webbing guide (A) mounting bolts. |
6. |
After disconnecting the pretensioner connector lock pin,
remove the front seat belt pretensioner connectors (A), loosen the
mounting bolts, then remove the front seat belt pretensioner (B).
|
7. |
Install in the reverse order of removal.
|
Pre-tensioner seat belt
Your vehicle is equipped with driver's and front passenger's pre-tensioner seat
belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly
against the occup ...
Rear Door Side Curtain Components and Components Location
Components
1. Extention profile2. Bearing3. Integrated Helix drive4. Cassette5. Bearing6. Flap7. Antenna8. Driving unit
...
Brake discs, pads, calipers and rotors
Check the pads for excessive wear, discs for run out and wear, and calipers for
fluid leakage. ...