>
Replacement |
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Disconnect the rear seat frame mounting connector (A). |
3. |
After loosening the mounting bolts and nuts, then remove the rear seat frame assembly (B).
|
4. |
Install in the reverse order of removal.
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Disconnect the connector (A). |
3. |
After loosening the mounting bolts and nuts, then remove the leg support (B).
|
4. |
Install in the reverse order of removal. |
Windshield Deicer Repair procedures
Inspection
1.
Remove the cowl top cover (A).
(Refer to Body - "Wiper")
2.
Disconnect the windshield deicer connector (A) from the wiper motor linkage.
3.
Check for continuity between the ...
Hood Weatherstrip Repair procedures
Replacement
1.
Remove the glue on end of both sides before removing the hood weatherstrip (A).
•
Be careful not to scratch the hood weatherstrip.
2.
Installatio ...
Trunk Lid Key Holder Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...