>

Hyundai Equus: Front Seat Shield Inner Cover Repair procedures - Front Seat - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Front Seat Shield Inner Cover Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
Remove the front seat lower protector (A).

3.
After loosening the mounting bolt, then remove the front seat belt buckle (A).

Tightening torque :
39.2 ~ 53.9 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft)

4.
Remove the cap (A) and then loosen the mounting screws.
5.
Using a screwdriver or remover, remove the front seat shield inner cover (B).

6.
Install in the reverse order of removal.
   
Replace any damage clips.
    Front Seat Shield Inner Cover Components and Components Location
    Component Location 1. Front seat shield inner cover ...

    Front Seat Back Cover Components and Components Location
    Component Location 1. Front seat back cover ...

    See also:

    Auto Door Lock/Unlock Features
    You can modify some of the auto door lock/unlock features from the User Setting Mode. Refer to the User Setting Mode in section 4. ...

    Seat belt restraint system
    WARNING For maximum restraint system protection, the seat belts must always be used whenever the car is moving. Seat belts are most effective when seatbacks are in the upright position. Chi ...

    Sedan Front Body
    Front body A Roof panel front cornerFront pillar outer cornerHood hinge mounting hole (O13)Shockabsorber mounting hole (O24)Front end module mounting hole (O9)Cowl top cover mounting hole (O7) F ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com