>
Replacement |
1. |
Remove the safety belt (A) by turning it in the direction of arrow using a flat-head screwdriver. |
2. |
Remove the front seat track mounting cover. |
3. |
After loosening the mounting bolts and nuts, remove the front seat assembly (A).
|
4. |
Disconnect the front seat integration connector (A).
[Driver's]
[Passenger's] |
5. |
Disconnect the rear monitor image cable connector (A). |
6. |
Install in the reverse order of removal.
|
Owner maintenance
The following lists are vehicle checks and inspections that should be performed
by the owner or an authorized EQUUS dealer at the frequencies indicated to help
ensure safe, dependable operation of ...
Checking the power steering fluid level
With the vehicle on level ground, check the fluid level in the power steering
reservoir periodically. The fluid should be between MAX and MIN marks on the side
of the gauge at the normal tempe ...
Overhead Console Lamp Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the overhead console lamp (A) after loosening the overhead console lamp screw(2EA).
3.
Disconnect the sunroof switch conn ...