>
Replacement |
|
|
1. |
Remove the mounting clips. |
2. |
After loosening the mounting clips, then remove the engine room side cover (A). |
3. |
After loosening the mounting clips, then remove the radiator grill upper guide (A). |
4. |
Loosen the front bumper upper mounting clips and bolts. |
5. |
After loosening the front bumper side's mounting screw, then disconnect the side's.
|
6. |
Disconnect the front bumper main connector (A). |
7. |
Disconnect the fog lamp connector (A). |
8. |
Remove the front bumper cover (A). |
9. |
Install in the reverse order of removal.
|
Components and Components Location
Component Location
...
EPB Switch Repair procedures
Removal
1.
Turn ignition switch off and disconnect the battery (-) cable from the battery
2.
Remove the driver side crash pad side cover.
(Refer to Body - "Crash Pad")
3.
Remove the cra ...
Horn
To sound the horn, press the area indicated by the horn symbol on your steering
wheel (see illustration). The horn will operate only when this area is pressed.
CAUTION
Do not strike the horn s ...