>
Replacement |
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Remove the rear seat back assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
3. |
Remove the rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Trim") |
4. |
Remove the rear wheel house trim.
(Refer to Interior Trim - "Rear Wheel House Trim") |
5. |
Remove the rear pillar trim.
(Refer to Interior Trim - "Rear Wheel House Trim") |
6. |
After loosening the mounting bolt, then remove the rear seat belt lower anchor (A).
[LH, RH]
|
7. |
Disconnect the connectors (A). |
8. |
Remove the caps (B). |
9. |
After loosening the mounting bolts, remove the rear tower console complete assembly (C). |
10. |
After loosening the mounting screws, then remove the rear package tray trim (A). |
11. |
Install in the reverse order of removal.
|
Reservoir Tank Description and Operation
Description
The volume is 5.2 liter and the maximum operation pressure is 16bar. (Bursting pressure: 40bar)
The pressure of reservoir tank is monitored every 30 min while driving. ...
Front Lower Arm Repair procedures
Removal
Remove the lateral arm.
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
•
...
All season tires
HYUNDAI specifies all season tires on some models to provide good performance
for use all year round, including snowy and icy road conditions.
All season tires are identified by ALL SEASON and/or M ...