>

Hyundai Equus: Rear Wheel House Trim Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Wheel House Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Remove the rear seat back assembly. (Refer to Rear Seat - "Rear Seat Assembly")

3.	Remove the rear door scuff trim. (Refer to Interior Trim - "Door Scuff Trim")

4.	Slighty remove the rear door body side weatherstrip.

5.	Using a screwdriver or remover, remove the rear wheel house trim (A).

6.

Install in the reverse order of removal.

•	Replace any damage clips.

Rear Wheel House Trim Components and Components Location

Component Location 1. Rear wheel house trim ...

Rear Package Tray Trim Components and Components Location

Component Location 1. Rear package tray trim ...

See also:

Floor Console Assembly Components and Components Location
Component Location 1. Floor console assembly ...

Fuel Line Repair procedures
Removal 1. Turn ignition switch OFF and disconnect the negative (-)battery cable. 2. Release the residual pressure in fuel line. (Refer to Fuel Delivery System - "Release Residual Pressure in ...

Pantoscopic Camera Repair procedures
Removal In case of bad quality or poor focus, be sure to check the camera lense surface condition and foreign materials. Front Pantoscopic Camera 1. Disconnect the negati ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com