>
Replacement |
|
|
1. |
Remove the main crash pad assembly.
(Refer to Crash Pad - "Main Crash Pad Assembly") |
2. |
Disconnect the steering column connectors.
(Refer to Steering System - "Steering Column and Shaft") |
3. |
Down the steering column after loosening the mounting bolts.
(Refer to Steering System - "Steering Column and Shaft") |
4. |
Disconnect the blower unit connectors. |
5. |
Disconnect the mounting clip (A). |
6. |
Disconnect the connector (A). |
7. |
Loosen the mounting bolts and nuts, then gently move the shift lever bracket (B) away from the shift lever. |
8. |
After loosening the mounting nuts, then remove the shift lever panel (A).
|
9. |
Disconnect the connector (A). |
10. |
After loosening the mounting nuts, then remove the LVDS (B).
|
11. |
Disconnect the passenger compartment junction box connectors (A). |
12. |
Disconnect the multi box connectors (A).
[Driver's]
[Passenger's] |
13. |
After loosening the mounting bolts and nuts, then remove the cowl cross bar assembly (A). |
14. |
Install in the reverse order of removal.
|
Sliding the Sunroof
The Engine Start/Stop Button must be in the ON position before you can open or
close the sunroof.
Pressing the sunroof control lever backward or forward momentarily to the second
detent posit ...
Opening the Hood
...
Rear Seat Assembly Repair procedures
Replacement
[Rear Seat Cushion Assembly]
1.
Pull it up and remove the rear seat cushion assembly (A).
2.
Install in the reverse order of removal.
•
Make sure the co ...