>
Hyundai Equus Manuals

Hyundai Equus: Main Crash Pad Assembly Repair procedures - Crash Pad - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Main Crash Pad Assembly Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Main Crash Pad Assembly Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the front pillar trim.
(Refer to Interior Trim - "Front Pillar Trim")
2.
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim")
3.
Remove the front LCD monitor.
(Refer to Body Electrical System - "Front LCD Monitor")
4.
Remove the AVN head unit.
(Refer to Body Electrical System - "AVN Head Unit")
5.
Remove the instrument cluster.
(Refer to Body Electrical System - "Instrument Cluster")
6.
Remove the crach pad center panel.
(Refer to Crash Pad - "Crach Pad Center Panel")
7.
Remove the steering wheel.
(Refer to Steering System - "Steering Wheel")
8.
Remove the multifunction switch assembly.
(Refer to Body Electrical System - "Multifunction Switch")
9.
Disconnect the head up display (HUD) unit connector (A).

10.
After loosening the mounting screws, then remove the crash pad upper panel [LH] (A).

11.
Disconnect the crash pad upper panel switch connector (A).

12.
After loosening the mounting screws, then remove the cubis unit (A).

13.
Disconnect the cubis unit connectors (A).

14.
Disconnect the photo sensor connector (A).

15.
Disconnect the center speaker connector (A).

16.
Loosen the mounting bolts.
17.
Disconnect the passenger's airbag connectors (A).

18.
After loosening the mounting bolts and nuts, then remove the main crash pad assembly (A).

19.
Install in the reverse order of removal.
   
•
Make sure the crash pad fits onto the guide pins correctly.
•
Before tightening the bolts, make sure the crash pad wire harnesses are not pinched.
•
Make sure the connectors are plugged in properly, and the antenna lead is connected properly.
•
Enter the anti- theft code for the radio, then enter the customer`s radio station presets.
    Main Crash Pad Assembly Components and Components Location
    Component Location 1. Main crash pad assembly ...

    Cowl Cross Bar Assembly Components and Components Location
    Component Location 1. Cowl cross bar assembly ...

    See also:

    Anti-lock brake system (ABS)
    WARNING ABS (or ESC) will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance b ...

    Engine Oil Repair procedures
    Engine Oil And Filter Replacement     • Prolonged and repeated contact with mineral oil will result in the removal of natural fats from the skin, leading to dryness, irrita ...

    ON/OFF Solenoid Valve Specifications
    Specifications ON/OFF Solenoid Valve x Control type : Normal low type Control pressure kpa (kgf/cmx, psi)539.36(5.5, 78.23) Internal resistance(x)10~11 ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com