>

Hyundai Equus: Crash Pad Side Cover Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Side Cover Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Using a screwdriver or remover, remove the crash pad side cover (A). [LH] [RH]

2.

Install in the reverse order of removal.

•	Replace any damage clips.

Crash Pad Side Cover Components and Components Location

Component Location [LH] 1. Crash pad side cover [LH] [RH] 1. Crash pad side cover [RH] ...

Crash Pad Under Cover Repair procedures

Replacement [LH] • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply ...

See also:

Adaptive Front Lighting System Repair procedures
Removal AFLS Unit 1. Disconnect the negative (-) battery terminal. 2. Remove the glove box housing (A). (Refer to the Body group - "Crash pad") 3. Disconnect the glove box housing connect ...

Power Door Lock Actuators Repair procedures
Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2. Remove the front door module. (Refer to Body - "Front Door Module") 3. ...

Input Speed Sensor Repair procedures
Inspection 1. Check signal waveform of Input speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com