>

Hyundai Equus: Cluster Fascia Panel Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Crash Pad / Cluster Fascia Panel Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Using a screwdriver or remover, remove the center fascia upper panel (A).

2.

Install in the reverse order of removal.

•	Replace any damage clips.

Cluster Fascia Panel Components and Components Location

Component Location 1. Cluster fascia panel ...

Center Fascia Panel Components and Components Location

Component Location 1. Center fascia upper panel2. Center fascia lower panel ...

See also:

If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...

G Sensor Repair procedures
Removal • be careful to avoid excessive external shock. • connectors to avoid damage to the connector pins. G-sensor FL 1. Remove the front bumper. (Refer to ...

Maintenance service
You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Should you have any doubts concerning the ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com