>
Adjusting Instrument Cluster Illumination
The brightness of the instrument panel illumination can be adjusted by pressing the illumination control buttons (“+” or “-”) when the Engine Start/Stop Button is ON or the tale lights are turned on.
Power Trunk Module Drive Unit Repair procedures
Removal
•
When removing and installing the trunk lid, an assistant is necessary.
•
Take care not to be closed the trunk when removing the push rod.
•
Wear glove ...
Rear Wheel Guard Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
GAWR (Gross axle weight rating)
This is the maximum allowable weight that can be carried by a single axle (front
or rear). These numbers are shown on the certification label. The total load on
each axle must never exceed its GAW ...