[Front Console Armrest]
• |
Put on gloves to protect your hands. |
|
• |
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
• |
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. |
• |
Take care not to bend or scratch the trim and panels. |
|
1. |
Using a screwdriver or remover, remove the front console upper complete (A). |
2. |
Disconnect the connectors (A). |
3. |
Remove the console armrest tray (A). |
4. |
Remove the console armrest service cover (A). |
5. |
Loosen the mounting bolts, remove the console armrest (A). |
6. |
Disconnect the connectors (A). |
7. |
Remove the front console armrest (B). |
8. |
Install in the reverse order of removal.
• |
Make sure the connector is connected properly. |
• |
Replace any damage clips. |
|
|
[Rear Console Armrest]
• |
Put on gloves to protect your hands. |
|
• |
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
• |
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. |
• |
Take care not to bend or scratch the trim and panels. |
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Remove the rear seat back cover assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
3. |
Disconnect the connectors (A). |
5. |
After loosening the mounting bolts, remove the rear tower console complete assembly (C). |
6. |
Loosen the mounting screws and bolts, remove the rear console armrest (A). |
7. |
Install in the reverse order of removal.
• |
Make sure the connector is connected properly. |
• |
Replace any damage clips. |
|
|
Component Location
[Front Console Armrest]
1. Front console armrest
[Rear Console Armrest]
1. Rear console armrest
...