>

Hyundai Equus: Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.

Remove the cap (A) and remove the nuts, then remove the wiper arm (B).

Tightening torque :

22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.	Disconnect the nozzle hose (A).

3.	Detach the clips, then remove the cowl top cover (B).

4.

Install in the reverse order of removal.

•	Replace any damaged clips.

Components and Components Location

Component Location 1. Cowl top cover ...

Floor Console

...

See also:

Description and Operation
Description Active type ECS is applied and it includes the self leveling function.As shown in the picture, it consists of air spring, damper, reservoir tank, compressor (with dryer), solenoid ...

Front Impact Sensor (FIS) Repair procedures
Removal • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front impact sensor connec ...

Reporting safety defects
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com