>

Hyundai Equus: Outside Rear View Mirror Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Mirror / Outside Rear View Mirror Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	After loosening the mounting clips, then remove the front door frame inner cover (A).

2.	Disconnect the outside rear view mirror connector (A).

3.

After loosening the mounting bolts, then remove the outside rear view mirror (B).

Tightening torque :

6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)

4.

Install in the reverse order of removal.

•	Make sure the connector is connected properly.

•	Replace any damaged clips.

Outside Rear View Mirror Components and Components Location

Component Location 1. Outside rear view mirror ...

Inside Rear View Mirror Components and Components Location

Component Location 1. Inside rear view mirror ...

See also:

Special Service Tools
Special Service Tools Tool(Number and Name)IllustrationUse09581-11000Piston expanderSpreading the front disc brake piston.09568-2J100Ball joint removerRemoval of the rear assist arm and tie rod e ...

Canister Close Valve (CCV) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the CCV connector. 3. Measure resistance between the CCV terminal 1 and 2. 4. Check that the resistance is within the specific ...

Repair procedures
Removal Front Blind Camera 1. Remove the front bumper cover. (Refer to Body - "Front Bumper") 2. Remove the front blind camera (B) after removing the connector (A) and screws (4EA). Back ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com