>
Replacement |
1. |
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly") |
2. |
Remove a drip link assembly (A) after lowering a guide thoroughly by pushing a slide to rear. |
3. |
Remove the guide (A) and slide (B). |
4. |
Install in the reverse order of removal.
|
Repair procedures
Component Replacement after Deployment
Before doing any SRS repairs, use the GDS to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the related
...
Transmission Oil Temperature Sensor Schematic Diagrams
Circuit Diagram
...
Seat Belt Pretensioner (BPT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the safety belt (A) by turning it in the direction of arrow using a flat ...