Hyundai Equus: Side Sill Molding Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Side Sill Molding Repair procedures
| Replacement |
|
|
| 1. |
Loosen the side sill molding mounting screws. |
| 2. |
Using a screwdriver or remover, remove the side sill molding (A).
|
| 3. |
Install in the reverse order of removal.
|
Waist Line Molding Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
B Pillar Garnish Repair procedures
Replacement
[B Pillar upper garnish]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protec ...
See also:
Reprogramming a single HomeLink® button
To program a new device to a previously trained HomeLink® button, follow these
steps:
1. Press and hold the desired HomeLink® button. Do NOT release until step 4 has
been completed.
2. When the ...
Solenoid Valve Description and Operation
Description
Four air spring solenoid valves (‘-’ control) and one
ambient solenoid valve are embedded inside this solenoid valve block as
shown in the circuit diagram below. When connecting the ...
Electric Parking Brake (EPB) Description and Operation
Description
The EPB is an electronic parking brake.
The EPB is different from existing parking systems which
operated with the brake pedal or the lever type. The EPB system sends
the signal t ...
Categories
Hyundai Equus Manuals
