>
Hyundai Equus Manuals

Hyundai Equus: Waist Line Molding Repair procedures - Body Side Molding - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Waist Line Molding Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Waist Line Molding Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the front waist line molding (A).
2.
Using a screwdriver or remover, remove the rear waist line molding (B).

3.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    Rear Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

    Side Sill Molding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

    See also:

    Fuel Filler Cap Description and Operation
    Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap ...

    Seat Belt Buckle Switch (BS) Components and Components Location
    Components ...

    Rear LCD monitor Repair procedures
    Removal     Take care not to scratch the crash pad and related parts. 1. Disconnect the negative (-) battery terminal. 2. Remove the LCD monitor bezel (A) from the front s ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com