>
Replacement |
1. |
Remove the rear door window glass.
(Refer to Rear Door - "Rear Door Window Glass") |
2. |
Remove the rear door outside handle.
(Refer to Rear Door - "Rear Door Outside Handle") |
3. |
Loosen the rear door outside handle base mounting screw (A). |
4. |
Disconnect the rear door curtains motor connector (A). |
5. |
Using a screwdriver or remover, remove the extension cover (A). |
6. |
Loosen the mounting bolts, remove the rear door curtains (B).
|
7. |
Loosen the mounting bolts and nuts, remove the rear channel (A). |
8. |
Loosen the door latch (C) screws, remove the module assembly (B).
|
9. |
Disconnect the connectors (A) and rear door module wiring harness (B). |
10. |
Install in the reverse order of removal.
|
VSM OFF Switch Schematic Diagrams
Part Circuit Diagram
...
Rear Seat Back Cover Components and Components Location
Component Location
1. Rear seat back cover [LH]2. Rear seat back cover [RH]
...
Rear cross traffic alert
When your vehicle moves backwards from a parking position, the sensor detects
approaching vehicles to the left or right side direction and gives information to
the driver.
Operating condition ...