>
Replacement |
1. |
Pull down rear door window glass by pressing the power window glass switch. |
2. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
3. |
After loosening the mounting screws, then remove the rear door belt outside weatherstrip. |
4. |
Remove the rear door belt inside weatherstrip. |
5. |
Remove the door frame inner cover. |
6. |
Remove the rear channel door frame garnish. |
7. |
Loosen the rear delta lower channel (C) mounting bolts. |
8. |
Remove the glass mounting plug hole (B). |
9. |
Carefully adjust the rear door window glass (A) until you can
see the bolt, then loosen them. Separate the glass from the glass run
and carefully pull the glass out through the window slot.
|
10. |
Install in the reverse order of removal.
|
Rear Door Side Curtain Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front door trim")
3.
Disconnect the rear door side curtain connector (A).
4.
...
Driver's attention
The driver must be cautious in the below situations for the system may not assist
the driver and may not work properly.
The lane is not visible due to snow, rain, stain, a puddle or many other
...
Smart Cruise Control Unit Specifications
Specification
ItemSpecificationPower supply(V)12Operation voltage (V)9 ~ 16
...