>
Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
Disconnect the rear door inside handle lamp connector (A). |
3. |
After loosening the mounting screws, then remove the rear door inside handle (B). |
4. |
Install in the reverse order of removal.
|
Rear Left Door Module (RLDM) Components and Components Location
Component
...
Severe driving conditions
A - Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature
or less than 10 miles (16 km) in freezing temperature
B - Extensive engine idling or low speed driving for lo ...
PGS Unit (Back & Blinde Unit) Components and Components Location
Components
...