>
Replacement |
1. |
Remove the front door trim.
(Refer to Front Door - "Front Door Trim") |
2. |
Remove the door outside belt weatherstrip. |
3. |
Remove the plug hole (A).
|
4. |
Remove the outside belt weatherstrip (C). |
5. |
Carefully adjust the front door window glass (B) until you
can see the bolts, then loosen them. Separate the glass from the glass
run and carefully pull the glass out through the window slot.
|
6. |
Install in the reverse order of removal.
|
Rear Shock Absorber Components and Components Location
Components
1. Insulator cap2. Lock nuts3. Bracket assembly4. Dust cover5. Bumper stopper6. Shock absorber
...
Electronic stability control (ESC)
The Electronic Stability control (ESC) system is designed to stabilize the vehicle
during cornering maneuvers. ESC checks where you are steering and where the vehicle
is actually going. ESC ap ...
Tire care
For proper maintenance, safety, and maximum fuel economy, you must always maintain
recommended tire inflation pressures and stay within the load limits and weight
distribution recommended for your ...