Hyundai Equus: Emission Control System

Smart Cruise Control Switch Repair procedures

Inspection [Measuring Resistance] 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between terminals on the control switch when each function ...

General Information

...

See also:

Pre-active Seat Belt (PSB) Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the safety belt (A) by turning it in the direction of arrow using a flat ...

Rear Variable Damper Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the rear shock absorber (A) from the rear axle by loo ...

Turn By Turn (TBT) Mode (if equipped)
This mode displays the state of the navigation. ...