>

Hyundai Equus: Emergency Fastening Device (EFD) Description and Operation - Seat Belt Pretensioner - Restraint - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Emergency Fastening Device (EFD) Description and Operation

Description
The Emergency Fastening Device (EFD) operates at the same time with the Seat Belt Pretensioner when it satisifies the deployment condition after a collision. It is an auxiliary equipment to prevent a driver and passenger from breaking away by pulling the seat belt toward the anchor side after a collision. It is located near the anchor on the driver and passenger seat and is supported by two cables.
   
Never measure the resistance of the anchor pretensioner directly, the current of the measuring device may cause unexpected airbag deploy.
    Seat Belt Pretensioner (BPT) Repair procedures
    Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the safety belt (A) by turning it in the direction of arrow using a flat ...

    Emergency Fastening Device (EFD) Components and Components Location
    Components ...

    See also:

    Positive Crankcase Ventilation (PCV) Valve Repair procedures
    Removal 1. Disconnect the vapor hose (A). 2. Remove the PCV valve (B). Inspection 1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves ...

    Heated Steering wheel Repair procedures
    Inspection 1. Measure a resistance of NTC and Heated pad. A. NTC resistance(Black / Yellow, Black) - 10.0 kx ± 10% (25°C) B. Heated pad resistance (Yellow, Black) - 1.6 ~ 2.0 x ± 10% 2 ...

    Engine overheat
    If your temperature gauge indicates overheating, you experience a loss of power, or hear loud pinging or knocking, the engine is probably too hot. If this happens, you should: 1.Pull off the road ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com