>
Inspection |
1. |
How to reassemble the Headrest which was released by rear (or front) Impact. |
2. |
How to unlock the trigger in case of trigger is locked.
|
3. |
How to check whether installation is completed between the headrest and wiring connector.
|
4. |
Check the headrest module motor after removing the seat back cover.
(Refer to electrical seat - "Power seat motor" |
5. |
Check that the impact sensor (A) and wiring is normal after removing the floor console. |
Cowl Cross Bar Assembly Repair procedures
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
A/V Mode
This mode displays the state of the A/V system. ...
Repair procedures
EOL Input
Description
When shift shock is occurred or parts related with the transmission are replaced, EOL should be performed.
In the following case, EOL is required.
•
Transmission assem ...