>
Check the drive shafts, boots and clamps for cracks, deterioration, or damage. Replace any damaged parts and, if necessary, repack the grease.
Starter Relay Repair procedures
Inspection
1.
Disconnect the battery negative terminal.
2.
Remove the fuse box cover.
3.
Remove the starter relay(A).
4.
Using an ohmmeter, check that there is continuity between each ...
Cool and Warm Box Description and Operation
Description
Cool and warm box is a compartment where you can keep items cool or warm.
The sytem is a enviromentally friendly system that operates independently from the heater and A/C system.
...
CVVT (Continuously Variable Valve Timing) System Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance
with the ECM control signal which is calculated by ...