>

Hyundai Equus: Detecting sensor - Blind spot detection system (BSD) (If equipped) - Driving your vehicle - Hyundai Equus 2009-2024 Owners ManualHyundai Equus: Detecting sensor

The sensors are located inside of the rear bumper.


The sensors are located inside of the rear bumper.

Always keep the rear bumper clean for the system to work properly.

    Warning type
    The system will activate when: 1.The system is on 2.Vehicle speed is above 9.3 mph (15 km/h) 3.Other vehicles are detected in the rear side If a vehicle is detected within the boundary of the ...

    Warning message
    If the detecting sensor performance is low or overheated by foreign substances on the rear bumper, the message will appear to notify the driver. Also, the message may appear when there is heavy ...

    See also:

    Side Airbag (SAB) Module Repair procedures
    Removal Front Side Airbag 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the front seat assembly. (Refer to Body - "Front Seat As ...

    Middle Speed Sensor Schematic Diagrams
    Circuit Diagram ...

    For best battery service
    The battery is in the trunk. Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or t ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com