Hyundai Equus: Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Automatic Transmission System (SBC) / Hydraulic System / Description and Operation
| Description |
The hydraulic system consists of oil, an oil filter, an oil pump, and a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filter and gets distributed along the oil channels.
The oil becomes highly pressurized as it exits the oil pump
and passes through the line pressure valve before being fed to the
clutch & brake control valve, clutch, and brakes. TCM controls the
hydraulic pressure using solenoid valves and controls clutch and brake
operations.
Hydraulic System
...
Components and Components Location
Components Location
1. Oil pump assembly2. Automatic transmission3. Valve body assembly4. Oil pan
...
See also:
Rear Seat Belt Retractor Repair procedures
Replacement
•
When installing the belt, make sure not to damage the retractor.
1.
Remove the rear package tray trim.
(Refer to Interior Trim - "Rear Package Tray T ...
Auto Door Lock/Unlock Features
You can modify some of the auto door lock/unlock features from the User Setting
Mode.
Refer to the User Setting Mode in section 4. ...
Knock Sensor (KS) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold (Refer to “Intake And Exhaust System” in EM group).
3.
Disconnect the ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com