Hyundai Equus: Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Emission Control System / Exhaust Emission Control System / Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Emission Control System / Exhaust Emission Control System / Description and Operation
| Description |
Exhaust emissions (CO, HC, NOx) are controlled by a
combination of engine modifications and the addition of special control
components.
Modifications to the combustion chamber, intake manifold, camshaft and ignition system form the basic control system.
These items have been integrated into a highly effective
system which controls exhaust emissions while maintaining good
drivability and fuel economy.
Air/Fuel Mixture Control System [Multiport Fuel Injection (MFI) System]
The MFI system uses signals from the heated oxygen sensor to
activate and control the injector installed in the manifold for each
cylinder, thus precisely regulating the air/fuel mixture ratio and
reducing emissions.
This in turn allows the engine to produce exhaust gas of the
proper composition to permit the use of a three way catalyst. The three
way catalyst is designed to convert the three pollutants [hydrocarbons
(HC), carbon monoxide (CO), and oxides of nitrogen (NOx)] into harmless
substances. There are two operating modes in the MFI system.
| 1. |
Open Loop air/fuel ratio is controlled by information programmed into the ECM. |
| 2. |
Closed Loop air/fuel ratio is adjusted by the ECM based on information supplied by the oxygen sensor. |
Catalytic Converter Description and Operation
Description
The catalytic converter of the gasoline engine is a three way
catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and
separates oxygen from the oxides of nitrogen (NOx).
T ...
See also:
Description and Operation
Description
System Operation
Typically, lane departure warning is activated at a speed
over 70 km/h, but suppressed in case of unintentional lane departure
when driver do not operate turn sign ...
Cool and Warm Box Repair procedures
Replacement
1.
Remove the rear seat cushion and seat back assembly.
(Refer to Body - "Rear Seat Assembly")
2.
Remove the tower console assembly (A).
3.
Remove the rear console armrest (A ...
Seat Belt Buckle Switch (BS) Components and Components Location
Components
...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com