Hyundai Equus: Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Electrical System / Ignition System / Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Engine Electrical System / Ignition System / Description and Operation
| Description |
Ignition timing is controlled by the electronic control ignition timing system.
The standard reference ignition timing data for the engine
operating conditions are pre-pro grammed in the memory of the ECM
(Engine Control Module).
The engine operating conditions (speed, load, warm-up
condition, etc.) are detected by the various sensors. Based on these
sensor signals and the ignition timing data, signals to interrupt the
primary current are sent to the ECM.
The ignition coil is activated, and timing is controlled.
Ignition System
...
Repair procedures
On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test
1.
Check for DTCs.
•
If a DTC is present, perform troubleshooting in accordance with the pr ...
See also:
Tilting the Sunroof
To tilt the sunroof open:
Push the sunroof control lever upward to the second detent position. To stop
the sunroof tilting at any point, operate the control lever.
To close the sunroof:
Pull ...
Electric parking brake (EPB)
Applying the parking brake
To engage the parking brake, first apply the brake pedal and then pull the EPB
switch. Make sure that the brake warning light comes on.
WARNING
Do not operate the p ...
Components and Components Location
Components
1. BSD (Blind Spot Detection) switch module (ON/OFF switch & state LED)2. Speaker (Built in the cluster)3. Head Up Display (HUD)4. BSD warning lamp (Built in the outside mirror)5. ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com