>
Circuit Diagram |
Reprogramming a single HomeLink® button
To program a device to HomeLink® using a HomeLink® button previously trained,
follow these steps:
1. Press and hold the desired HomeLink® button. DO NOT release the button.
2. The indicator light ...
How does the air bag system operate
Air bags are activated (able to inflate if necessary) only when the Engine
Start/Stop Button is turned to the ON or START position.
Air bags inflate in the event of a severe frontal or side co ...
Repair procedures
Inspection
[System Inspection]
1.
Disconnect the vapor hose from the throttle body and connect a vacuum pump to the nipple on the throttle body.
2.
Check the following points with applying ...