>
Replacement |
|
|
1. |
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel") |
2. |
After loosening the mounting screw, then remove the crash pad under cover [LH] (A). |
3. |
Disconnect the under lamp and diagnosis connector (A). |
4. |
After loosening the mounting screws, then remove the crash pad under cover (A). |
5. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the cowl side trim.
(Refer to Interior Trim - "Cowl Side Trim") |
2. |
To remove the crash pad under cover [RH] (A), press both
sides of the locking pin and then pull it down in the direction of the
arrow. |
3. |
Disconnect the under lamp connector (A). |
4. |
Install in the reverse order of removal.
|
Front Lower Arm Repair procedures
Removal
Remove the lateral arm.
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
•
...
Lane departure warning system (LDWS) (If equipped)
This system detects the lane with the sensor at the front windshield and warns
you when your vehicle leaves the lane.
WARNING
The LDWS does not make the vehicle change lanes. It is the driver ...
A/V Mode
This mode displays the state of the A/V system. ...