>

Hyundai Equus: Crankshaft Position Sensor (CKPS) Description and Operation - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Crankshaft Position Sensor (CKPS) Description and Operation

Description
Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing.
This sensor is installed in ladder frame and generates alternating current by magnetic flux field which is made by the sensor and the target wheel when the engine rotates. The target wheel consists of 58 slots and 2 missing slots on 360 CA (Crank Angle).

    Engine Coolant Temperature Sensor (ECTS) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Remove the ECTS (Refer to "Removal"). 3. After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECT ...

    Crankshaft Position Sensor (CKPS) Specifications
    Specification ItemSpecificationCoil Resistance (x)774 ~ 946 [20°C (68°F)]Air cap(mm)0.5 ~ 1.5 ...

    See also:

    Components and Components Location
    Components 1. Door panel2. Door module3. Outside handle4. Window glass5. Door striker6. Power window motor 7. Door speaker8. Door checker9. Outside handle cover10. Outside handle pad11. Door str ...

    Specifications
    Specification Ignition System Ignition Coil ItemSpecification Primary Coil Resistance (x)0.62 ± 10% [20°C (68°F)]Secondary Coil Resistance (kx)7.0 ± 15% [20°C (68°F)] Spark Plug ItemS ...

    Curtain Airbag (CAB) Module Repair procedures
    Removal 1. Disconnect the battery negative cable and wait for at least 3 minutes before beginning work. 2. Remove the roof trim assembly. (Refer to Body - "Roof Trim Assembly") 3. Disconn ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com