>
Replacement |
|
|
1. |
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly") |
2. |
Remove the center fascia lower tray.
(Refer to Crash Pad - "Center Fascia Panel") |
3. |
Remove the AVN head unit.
(Refer to Body Electrical System - "AVN Head Unit") |
4. |
Remove the cluster fascia panel.
(Refer to Crash Pad - "Cluster Fascia Panel") |
5. |
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel") |
6. |
Remove the glove box housing.
(Refer to Crash Pad - "Glove Box Housing") |
7. |
To remove the crash pad under cover [RH] (A), press both
sides of the locking pin and then pull it down in the direction of the
arrow. |
8. |
Disconnect the under lamp connector (A). |
9. |
Remove the luggage trim[RH] (A). |
10. |
Using a screwdriver or remover, remove the crash pad side cover [RH] (A). |
11. |
After loosening the mounting screws, bolts, nuts, then remove the crash pad center panel (A). |
12. |
Install in the reverse order of removal.
|
Rear LCD monitor Components and Components Location
Components
...
Sunvisor Repair procedures
Replacement
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Use ...
Specifications
Specifications
ItemSpecificationSteering GearTypeRack & PinionRack strokeManual144mmAIR136mmPower Steering MotorTypeBLDC (WET type)Voltage13.5VSteering angle (Max.)InnerR17Manual42.67°±1°30’A ...