>
Replacement |
|
|
1. |
Remove the main crash pad assembly.
(Refer to Crash Pad - "Main Crash Pad Assembly") |
2. |
Disconnect the steering column connectors.
(Refer to Steering System - "Steering Column and Shaft") |
3. |
Down the steering column after loosening the mounting bolts.
(Refer to Steering System - "Steering Column and Shaft") |
4. |
Disconnect the blower unit connectors. |
5. |
Disconnect the mounting clip (A). |
6. |
Disconnect the connector (A). |
7. |
Loosen the mounting bolts and nuts, then gently move the shift lever bracket (B) away from the shift lever. |
8. |
After loosening the mounting nuts, then remove the shift lever panel (A).
|
9. |
Disconnect the connector (A). |
10. |
After loosening the mounting nuts, then remove the LVDS (B).
|
11. |
Disconnect the passenger compartment junction box connectors (A). |
12. |
Disconnect the multi box connectors (A).
[Driver's]
[Passenger's] |
13. |
After loosening the mounting bolts and nuts, then remove the cowl cross bar assembly (A). |
14. |
Install in the reverse order of removal.
|
Center Control Panel (CCP) Repair procedures
Removal
Front Keyboard Unit
1.
Disconnect the negative (-) battery terminal.
2.
Remove the floor console upper cover.
(Refer to Body - "Floor console assembly")
3.
Disconnect the connect ...
Rear Curtain Repair procedures
Inspection
Connect the battery voltage and check the rear curtain motor
rotation. If the motor does not operate properly, substitute with a
known-good rear curtain motor and check for proper op ...
Seat Belt Pretensioner (BPT) Repair procedures
Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the safety belt (A) by turning it in the direction of arrow using a flat ...