>
To open the box, pull up the lever(1).
If you press the operate button (2) once, the indicator on the button will be illuminated blue and then you can keep drinks cool. If you press the operate button (2) once more, the indicator on the button will be changed to amber and then you can keep drinks warm.
To stop operating, press the operate button (2) once more. The indicator on the button will be turned off.
It takes about 5 minutes to swift from warming mode to cooling mode or from cooling mode to warming mode.
There are partitions in the box to fix the drink. You can remove the partitions to fit bigger size bottles. Be careful not to damage the partitions.
CAUTION
CAUTION
There is the air inlet at the center of the rear seat and the air outlet at the inside of the trunk. If the air inlet is blocked, the efficiency will be lower. If the air inlet is blocked for a long time, the box may be damaged. Do not let the air inlet and outlet be blocked.
Solenoid Valve Repair procedures
Removal
•
Before replacing the relevant parts, use GDS equipment to fully discharge the air from the relevant parts.
(Refer to Air Suspension System - "Repair procedures ( ...
Description and Operation
Warning Lamp Activation
Warning Lamp Behavior after Ignition On
As soon as the operating voltage is applied to the SRSCM
ignition input, the SRSCM activates the warning lamp for a LED lamp
c ...
Components and Components Location
Components
1. LDWS ON/OFF Switch2. Instrument Cluster3. LDWS Unit4. Camera Module
...