>
Replacement |
|
|
1. |
Using a screwdriver or remover, remove the front console upper complete (A). |
2. |
Disconnect the connectors (A). |
3. |
Remove the console armrest tray (A). |
4. |
Remove the console armrest service cover (A). |
5. |
Loosen the mounting bolts, remove the console armrest (A). |
6. |
Disconnect the connectors (A). |
7. |
Remove the front console armrest (B). |
8. |
Install in the reverse order of removal.
|
|
|
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Remove the rear seat back cover assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
3. |
Disconnect the connectors (A). |
4. |
Remove the caps (B). |
5. |
After loosening the mounting bolts, remove the rear tower console complete assembly (C). |
6. |
Loosen the mounting screws and bolts, remove the rear console armrest (A). |
7. |
Install in the reverse order of removal.
|
2. Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery)
system
The Evaporative Emission Control System is designed to prevent fuel vapors from
escaping into the atmosphere.
(The ORVR system is designed to allow the vapors from the fuel tank to be loaded
into ...
Engine Coolant Temperature Sensor (ECTS) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Remove the ECTS (Refer to "Removal").
3.
After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECT ...
Electric Parking Brake (EPB) Schematic Diagrams
Circuit Dragram
...