>
Inspection |
1. |
Check the condenser fins for clogging and damage. If clogged,
clean them with water, and blow them with compressed air. If bent,
gently bend them using a screwdriver or pliers. |
2. |
Check the condenser connections for leakage, and repair or replace it, if required.
|
Replacement |
1. |
Recover the refrigerant with a recovery/recycling/charging station. |
2. |
Disconnect the negative (-) battery terminal. |
3. |
Remove the nuts, and then disconnect the discharge line (A) and liquid line (B) from the condenser.
|
4. |
Remove the radiator assembly.
(Refer to Engine Mechanical System - "Radiator") |
5. |
Remove the condenser (A) from radiator assembly. |
6. |
Install in the reverse order of removal.
|
Description and Operation
Description
Active type ECS is applied and it includes the self leveling
function.As shown in the picture, it consists of air spring, damper,
reservoir tank, compressor (with dryer), solenoid ...
Ignition Coil Description and Operation
Description
An ignition coil is an induction coil in an engine's ignition
system which transforms the battery's low voltage to the high voltage
needed to create an electric spark in the spark p ...
Do not let ice and snow accumulate underneath
Under some conditions, snow and ice can build up under the fenders and interfere
with the steering. When driving in severe winter conditions where this may happen,
you should periodically check un ...